D3522 Epoxy Pump Attachment

The Blastcrete Model D3522 Attachment is our solution for hot epoxy grouting for contractors who own hydraulic power units. Simply couple the D3522 Attachment to the hydraulic power and get infinitely variable pumping speeds from 0-6 cubic yards per hour at as much as 400 PSI pumping pressure. These are the simplest and safest epoxy pumps on the market to maintain and operate. Since no epoxy material comes in contact with the pump’s moving parts, the machine will last longer than expected.

Features

  • Infinitely variable speeds from 0- 6 yd³ (4.6 m³) per hour
  • 400 psi (28 bar) pumping pressure
  • Simple 2″ (5 cm) hydraulic squeeze pump with heavy-duty planetary gearbox drive
  • Lowest cost pump to purchase, own and operate
  • Longest-lasting pumping tubes in the industry
  • Universal mounting plate and forklift pickup

Applications

  • Hot epoxy mixes
  • ⅜-inch (10-mm) aggregate shotcrete
  • Cellular concrete
  • Shotcrete
  • Faux rock construction
  • Small slabs
  • Slab jacking
  • Block fill

Specifications

Length60” (152 cm)
Width48” (122 cm)
Height35” (89 cm)
Output capacity0-6 yd³/hr. (4.6 m³/hr.)
Hydraulic oil requirement10 GPM @ 3,000 PSI (38 LPM @ 207 bar)

Photo Gallery

  • D3522 Attachment
    D3522 Attachment
  • Hot Epoxy Mix Pump
    Hot Epoxy Mix Pump
  • D3522 Attachment Epoxy Pump
    D3522 Attachment Epoxy Pump

Get Quote Now


Get a quote for this machine, call us at 1-800-235-4867
International Calls: 1-256-235-2700

Share This