The Blastcrete Model RD6536 hydraulic concrete squeeze pump attachment offers variable speeds from 0-25 cubic yards per hour. This concrete pump attachment successfully pumps 3/8-inch shotcrete and concrete mixes. The RD6536 Concrete Pump requires 18 gallons of hydraulic oil per minute at 3,000 PSI. The concrete pump’s primary wear part, the 3-inch rubber pumping tube, can be replaced in the field in 20 minutes. These are simplest and safest concrete pumps on the market to maintain and operate. Since no concrete material comes in contact with the pump’s moving parts, the machine’s lifespan reaches the top of the industry.
A Skid Steer Concrete Pump for ICF, Block Fill and Slab Work
The RD6536 uses a universal skid steer mounting plate, so contractors can turn a skid steer they already run into a concrete pump. It is built for insulated concrete forms, block fill, slabs, slab jacking, cellular concrete and faux rock work, and pumps grout, shotcrete and concrete mixes at up to 25 cubic yards per hour.
A hydraulic remixer in the receiving hopper keeps aggregate and sand suspended, and the pump runs in forward or reverse to relieve pressure build-up. The 48-inch-wide frame fits between the wheel wells of most standard work trucks, and forklift pockets make loading and unloading quick. Cleanup takes about 5 minutes with water and a sponge ball.
Features
- Forklift pick-up
- 3" hydraulic squeeze pump with variable speed from 0-25 cubic yards (0-19 cubic meters) per hour
- Universal skidsteer mounting plate
- Manual hydraulic controls
- Hydraulic remixer in the receiving hopper
